|

Influence of Geometric Features of the Peripheral Part of the Thin-Walled Spherical Segment on the Explosive Throwing Process

Авторы: Baburin M.A., Baskakov V.D., Eliseev S.V., Karnaukhov K.A., Tarasov V.A. Опубликовано: 30.04.2020
Опубликовано в выпуске: #2(131)/2020  

DOI: 10.18698/0236-3941-2020-2-76-87

 
Раздел: Машиностроение и машиноведение | Рубрика: Технология машиностроения  
Ключевые слова: spherical segment, liner, explosive throwing, explosively formed projectile, folded stern

The main factors controlling the formation of the stern of explosively formed projectiles are investigated using numerical calculations in a three-dimensional formulation of a problem. To form folds in the stern, it is proposed to use thin-walled spherical segments with a peripheral thickness deviation in terms of decreasing or increasing with respect to the thickness in the central part. The configurations of explosively formed projectiles with inclined folds in the stern are shown, and it is proposed to describe the fold inclination by two angles of its position. The effect of folds in the stern on the change in aerodynamic coefficients for a wide range of angle of attack is numerically studied. The angular velocity of the axial rotation of explosively formed projectiles with inclined folds in the stern is estimated based on the Newton method and considering the angles of its position. The results obtained are of interest to specialists working in the field of physics of explosion and high-speed impact, as well as those dealing with aerodynamics of aircrafts, mainly of axisymmetric shape

Литература

[1] Orlenko L.P., ed. Fizika vzryva [Explosion physics]. Moscow, Fizmatlit Publ., 2004.

[2] Selivanov V.V., ed. Boepripasy. T. 1 [Munitions. Vol. 1]. Moscow, BMSTU Publ., 2016.

[3] Baskakov V.D., Tarasov V.A., Kolpakov V.I., et al. Assessment method for impact of design errors in explosively formed penetrators construction on hits accuracy and penetration of elongated projectiles. Oboronnaya tekhnika, 2010, no. 1-2, pp. 90--97 (in Russ.).

[4] Bender D., Chouk B., Fong R., et al. Explosively formed penetrators (EFP) with canted fins. Proc. 19th Int. Symp. Ballistics, 2001, vol. 2, pp. 755--762.

[5] Liu J., Gu W., Lu M., et al. Formation of explosively formed penetrator with fins and its flight characteristics. Def. Tech., 2014, vol. 10, no. 2, pp. 119--123. DOI: https://doi.org/10.1016/j.dt.2014.05.002

[6] Asmolovskiy N.A., Baskakov V.D., Tarasov V.A. The impact of periodic disturbances on the formation of high-speed rod elements. Izvestiya vysshikh uchebnykh zavedeniy. Mashinostroenie [Proceedings of Higher Educational Institutions. Маchine Building], 2013, no. 8, pp. 8--14 (in Russ.). DOI: http://dx.doi.org/10.18698/0536-1044-2013-8-8-14

[7] Asmolovskiy N.A., Baskakov V.D., Zarubina O.V. Research into the effect of technological imperfections of meniscus liners on explosive formation dynamics of high-speed rod elements. Vestn. Mosk. Gos. Tekh. Univ. im. N.E. Baumana, Mashinostr. [Herald of the Bauman Moscow State Tech. Univ., Mechan. Eng.], 2015, no. 5, pp. 72--86 (in Russ.). DOI: http://dx.doi.org/10.18698/0236-3941-2015-5-72-86

[8] Asmolovskiy N.A., Baskakov V.D., Boyarskaya R.V., et al. Mathematical modeling of shock loading of the meniscus liner. Matematicheskoe modelirovanie i chislennye metody [Mathematical Modeling and Computational Methods], 2016, no. 1, pp. 52--67 (in Russ.).

[9] Baburin M.A., Baskakov V.D., Eliseev S.V., et al. Numerical analysis of the controlled loss of stability of meniscal form liners at high-speed collapse. Herald of the Bauman Moscow State Technical University, Series Natural Sciences, 2019, no. 4, pp. 22--39 (in Russ.). DOI: http://dx.doi.org/10.18698/1812-3368-2019-4-22-39

[10] Babkin A.V., Selivanov V.V. Osnovy mekhaniki sploshnykh sred [Fundamentals of continuum mechanics]. Moscow, BMSTU Publ., 2004.

[11] Johnson G.R., Stryk R.A. Some considerations for 3D EFP. Int. J. Impact Eng., 2006, vol. 32, no. 10, pp. 1621--1634. DOI: https://doi.org/10.1016/j.ijimpeng.2005.01.011

[12] Liu J.F., Long Y., Ji Ch., et al. Numerical and experimental study on the formation and dispersion patterns of multiple explosively formed penetrators. Lat. Am. J. Solids Struct., 2017, vol. 14, no. 4, pp. 685--699. DOI: http://dx.doi.org/10.1590/1679-78253385

[13] Hallquist J.O. LS Dyna theory manual. Livermore, LSTC, 2005.

[14] LS Dyna keyword user’s manual. Livermore, LSTC, 2007.

[15] Baskakov V.D., Karnaukhov K.A. Research into the process of impingement of two plane jets of an ideal fluid with free boundaries. J. Phys.: Conf. Series, 2016, vol. 731, no. 1, art. 012002. DOI: https://doi.org/10.1088/1742-6596/731/1/012002

[16] Li V., Van S., Li V., et al. Research on the skirt tail explosively formed projectile stable shaping technology. J. Appl. Mech. Tech. Phy., 2016, vol. 57, no. 5, pp. 894--899. DOI: https://doi.org/10.1134/S0021894416050175

[17] Kruglov P.V., Kolpakov V.I. Mechanism of explosive formation of high-velocity elongated projectiles from steel segment lining. Inzhenernyy zhurnal: nauka i innovatsii [Engineering Journal: Science and Innovation], 2017, no. 12 (in Russ.). DOI: http://dx.doi.org/10.18698/2308-6033-2017-12-1714

[18] Cengel Y.A., Cimbala J.M. Fluid mechanics. Fundamentals and applications. New York, McGraw Hill, 2014.

[19] Asmolovskiy N.A., Baskakov V.D., Tarasov V.A. Numerical and analytical evaluation aerodynamic coefficients of elongated bodies with irregular shape. Vestn. Mosk. Gos. Tekh. Univ. im. N.E. Baumana, Mashinostr. [Herald of the Bauman Moscow State Tech. Univ., Mechan. Eng.], 2014, no. 4, pp. 109--122 (in Russ.).

[20] Kalugin V.T., ed. Aerodinamika [Aerodynamics]. Moscow, BMSTU Publ., 2017.

[21] Kalugin V.T., Golubev A.G., Lutsenko A.Yu., et al. Raschet aerodinamicheskikh kharakteristik tel slozhnoy formy pri sverkhzvukovykh skorostyakh obtekaniya [Calculation of aerodynamic characteristics for a complex body at hypersonic ambient velocity]. Moscow, BМSTU Publ., 2012.