|

Computational study of the thermal state of transonic and supersonic high elongation duct in the blown-in coolant swirl of different degrees

Authors: Voronetskiy A.V., Aleksandrov V.Yu., Aref'ev K.Yu. Published: 02.09.2015
Published in issue: #4(103)/2015  

DOI: 10.18698/0236-3941-2015-4-20-34

 
Category: Aviation and Rocket-Space Engineering | Chapter: Aerodynamics and Heat Transfer Processes in Aircrafts  
Keywords: rotation, film cooling, transonic flow, mathematical modeling, high elongation duct

The paper considers the high elongation ducts with transonic and supersonic flow velocities, which are often used in the multi-purpose power and propulsion plants. In many instances, their external cooling involves considerable technical complexity. It may be impossible due to the absence of a liquid coolant. The walls of the duct require protecting due to a high level of the thermal load. This problem can be solved by applying a gaseousfilm cooling system. The paper discusses the problem of increasing the film cooling efficiency for the high elongation ducts with transonic and supersonic flow velocities (i.e. reducing the required coolant mass flow rate) by optimizing the flow swirl level. The obtained computational functions allow estimating the impact of design drivers, a flow regime, and flow turbulence on the efficiency of the gaseous film cooling. The results can be used for designing hyperthermal ducts, generator exhaust units, technological unit barrels, mixing and afterburner chambers.

References

[1] Arefyev K.Yu. Research of Methods Intensifying the Nitrous Oxide Decomposition in a Small-Size Gas Generator with a Resonant Gasdynamic System for a Work-Process Initiation. Izv. Vyssh. Uchebn. Zaved., Mashinostr. [Proc. Univ., Mech. Eng.], 2013, no. 6, pp. 60-65 (in Russ.).

[2] Voronetskiy A.V., Suchkov S.A., Filimonov L.A. Peculiarities of high-temperature two-phase flow of combustion products in channels with an intentionally structured system of shock-waves. Teplofiz. Aeromekh. [Thermophys. Aeromech], 2007, vol. 14, no. 2, pp. 209-218 (in Russ.).

[3] Karimova A.G., Dezider’ev S.G., Zubarev V.M., Khabibullin M.G. On Experimental Studies of Processes of Heat Exchange and Efficiency of Thermal Curtain at Porous Injection. Izv. Vyssh. Uchebn. Zaved., Aviats. Tekh. [Russ. Aeronaut.], no. 1, pp. 37-39 (in Russ.).

[4] Voronetskiy A.V., Aleksandrov V.Yu., Arefyev K.Yu. Numerical analysis of a gas veil cooling system for high-aspect-ratio transonic cylindrical channels. Izv. Vyssh. Uchebn. Zaved., Mashinostr. [Proc. Univ., Mech. Eng.], 2014, no. 3, pp. 15-22 (in Russ.).

[5] Perepechko L.N. Investigation of heat mass transfer processes in the boundary layer with injection. Arch. Thermodynamics, 2000, vol. 21, no. 3-4, pp. 41-54.

[6] Piralishvilli Sh.A., Polyaev V.M., Sergeev M.N. Vikhrevoy effekt. Eksperiment, teoriya, tekhnicheskie resheniya [Vortex effect. Experiment, theory, technical solutions]. Moscow, UNPTs Energomash Publ., 2000. 412 p.

[7] Kutateladze S.S., Leont’ev A.I. Thermal curtains with a turbulent boundary layer of gas. High Temperature, 1963, vol. 1, no. 2, pp. 281-290 (in Russ.).

[8] Lyashkov V.I. Teoreticheskie osnovy teplotekhniki [Theoretical Foundations of Thermal Engineering]. Moscow, Mashinostroenie Publ., 2005. 260 p.

[9] Borovoi V.Ya., Skuratov A.S., Surzhikov S.T. Study of convective heating of segmental-conical Martian descent vehicle in shock wind tunnel. AIAA. Paper 2634, 2004.

[10] Menter F.R. Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications. AIAA Journal. August 1994,. vol. 32, pp. 1598-1605.

[11] User’s manual on website "Software products and services from ANSYS and Fluent": http://www.fluent.com

[12] Aleksandrov V.J., Arefyev K.J. Numerical simulation and selection pall cooling gasdynamic canal. XXII International Conference on the Methods of Aerophysical Research, abstracts, part I, Novosibirsk, Russia, 2014, p. 6.