|

Recuperation of Aircraft Gas Turbine Engines to Solve Problems Land Transport and Energy

Authors: Benmunach A., Zanabili G., Govorkov A.S. Published: 11.12.2022
Published in issue: #4(143)/2022  

DOI: 10.18698/0236-3941-2022-4-19-32

 
Category: Aviation and Rocket-Space Engineering | Chapter: Thermal, Electric Jet Engines, and Power Plants of Aircrafts  
Keywords: gas turbine engines, recuperation, compressor, combustion chamber, turbine, output device

Abstract

The article presents an example of recuperation of aircraft gas turbine engines (GTE), adapted for use on ground conditions, used both for pipeline transportation of liquid, and gas forms which are oil or gas pipelines, and for power engineering. GTE due to its advanced qualities, such as compactness, specific energy intensity, throttle response, etc., have found a wide application in the form of power units for ground-based purposes. However, questions remain about their reliability and durability under these conditions, one of the approaches for solving these issues is the recuperation of the working process of the aircraft GTE. The paper presents a methodology for the implementation of a variant of the structural layout for recuperation of the power plant for the presented type. The principle of recuperation а GTE consists of the application of methods for converting, transferring, or redirecting heat in engine units Thus the goal of the presented work is to create a comparative methodology for mathematical modeling of the knownthermodynamic cycle of operation of a GTE and cycle with recuperation. The proposed research is aimed to study the option of using the energy of engine exhaust gases through a specially designed (selected) heat exchanger, the main work is the recognition and calculation of the actual state of the thermal potential in the engine, as well as the possibility of using the engine parameters averaged over the section to build a mathematical model for analyzing the performance of GTE cycles with or without heat recovery

Please cite this article in English as:

Benmunach A., Zanabili G., Govorkov A.S. Recuperation of aircraft gas turbine engines to solve problems land transport and energy. Herald of the Bauman Moscow State Technical University, Series Mechanical Engineering, 2022, no. 4 (143), pp. 19--32 (in Russ.). DOI: https://doi.org/10.18698/0236-3941-2022-4-19-32

References

[1] Krupenich I.N., Tkachenko A.Yu., Filinov E.P., et al. The efficiency limits of the traditional gas turbine engines. Vestnik UGATU [Vestnik USATU], 2016, vol. 20, no. 1, pp. 86--95 (in Russ.).

[2] Matveev V.N., Popov G.M., Goryachkin E.S. Optimization stagger angles of blade rows of a multistage high pressure compressor. Izvestiya Samarskogo nauchnogo tsentra RAN [Izvestia RAS SamSC], 2013, vol. 15, no. 6 (4), pp. 929--936 (in Russ.).

[3] Dobrovicescu A., Feidt M., Grosu L., et al. Analyse du comportement reel et de l’optimisation structurelle des cycles de turbines a gaz. Congres Francais de Thermique SFT2011, 2011, vol. 2, pp. 801--806.

[4] Feidt M., Costea M., Postelnicu V. Comparaison entre le cycle simple de Brayton avec apport thermique impose et avec contrainte de temperature maximale. Oil Gas Sc. Technol., 2006, vol. 61, no. 2, pp. 237--245. DOI: https://doi.org/10.2516/ogst:2006017x

[5] Popov G.M., Goryachkin E.S., Novikova Yu.D. Multicriteria optimization of the working process of axial compressor of gas turbine engine taking into account its multimode operation. Izvestiya Samarskogo nauchnogo tsentra RAN [Izvestia RAS SamSC], 2017, vol. 19, no. 1, pp. 98--106 (in Russ.).

[6] Sokolov M.A., Kuzmichev V.S., Kulagin V.V., et al. Preliminary study of principles of effective efficiency change of turboshaft engines of various schemes with heat recovery and intermediate cooling of working medium. Vestnik SGAU [Vestnik USATU], 2011, no. 3-4, pp. 21--29 (in Russ.).

[7] Chen L., Zheng J., Sun F., et al. Optimum distribution of HEX inventory for power density optimization of an endoreversible closed Brayton cycle. J. Phys. D.: Appl. Phys., 2001, vol. 34, no. 3, pp. 422--427. DOI: https://doi.org/10.1088/0022-3727/34/3/329

[8] Feidt M. Optimisation d’un cycle de Brayton moteur en contact avec des capacites thermiques finies. Rev. Gen. De Therm., 1996, vol. 35, no. 662--666. DOI: https://doi.org/10.1016/S0035-3159(96)80063-8

[9] Frangopoulos C.A., Dimopoulos G.G. Effect of gas-properties evaluation method on the optimum point of gas turbine cycles. Int. J. Thermodyn., 2005, vol. 8, no. 2, pp. 95--102.

[10] Akimov V.M., Bakulev V.I., Kurziner R.I., et al. Teoriya i raschet vozdushno-reaktivnykh dvigateley [Theory and calculation of air jet engines]. Moscow, Mashinostroenie Publ., 1987.

[11] Cleynen O. Thermodynamique de l’ingenieur. Lyon, Framabook, 2018.

[12] Kazandzhan P.K., Kuznetsov A.V. Turbovintovye dvigateli [Turbo engines]. Moscow, Voenizdat Publ., 1961.

[13] Omar Kh.Kh., Kuzmichev V.S., Tkachenko A.Yu. Improving the efficiency of aviation turbo-shaft gas turbine engine by using heat recovery. Vestnik UGATU [Vestnik USATU], 2020, vol. 24, no. 3, pp. 83--89 (in Russ.).

[14] Shlyakhtenko S.M., ed. Teoriya vozdushno-reaktivnykh dvigateley [Theory of air jet engines]. Moscow, Mashinostroenie Publ., 1975.

[15] Radin D.V., Makaryants G.M. Developing and experimental studying of dynamic characteristics of adaptive pressure pulsation dampener for the gas turbine engine fuel system. Trudy MAI, 2020, no. 112 (in Russ.). DOI: https://doi.org/10.34759/trd-2020-112-09