|

CFD-Based Development of Adaptive System Design for Regulating the Deposit Inflow

Authors: Belova O.V. , Volkov V.Yu., Zhuravlev O.N., Zorina I.G., Krutikov A.A. , Semikin D.A., Skibin A.P.  Published: 29.05.2014
Published in issue: #3(96)/2014  

DOI:

 
Category: Design  
Keywords: adaptive system, valve, throttle, magnet, coercive force, hydrodynamic force, software complex STAR-CCM+

Results of variant calculations of hydrodynamic forces acting on a valve of the adaptive system for inflow regulation depending on the flowrate are given for the case of a flow of liquid working medium (water). The relationships are defined for a hydrodynamic force that acts on the valve depending on the flowrate through the valve. A numerical verification of the obtained data is performed. For a forward direction of the working medium flow, the flowrate-induced forces are found that act on the magnetic valve depending on its position. According to the obtained data, a coercive force of the magnet is determined that should be 1.5 N. The more practically feasible design of a draining channel of bypass main is checked. In conformity with the obtained data, the hydrodynamic force acting on the valve differs by less than 3 % depending on the draining channel design.

References

[1] Shishov A.V., Belova O.V., Komrakova A.E. Application of computational fluid dynamics for determining hydrodynamic characteristics of the throttling device. Vestn. Mosk. Gos. Tekh. Univ. im. N.E. Baumana, Mashinostr., Spetsvyp. "Vakuumnye i kompressornye mashiny i pnevmooborudovanie" [Herald of the Bauman Moscow State Tech. Univ., Mech. Eng., Spec. Issue "Vacuum and compressor machines and pneumatic equipment"], 2011 (in Russ.).

[2] Belova O.V., Volkov VJu., Skibin A.P., Zorina I.G. Determination of the hydrodynamic characteristics of the throttling device using computational fluid dynamics. Vestn. Mosk. Gos. Tekh. Univ. im. N. E. Baumana, Mashinostr., Spetsvyp. "Vakuumnye i kompressornye mashiny i pnevmooborudovanie" [Herald of the Bauman Moscow State Tech. Univ., Mech. Eng., Spec. Iss. "Vacuum and compressor machines and pneumatic equipment"], 2011, no. 4, pp. 54-64 (in Russ.).

[3] User guide, CATIA Version 5.21, Dassault Systemes, 2009.

[4] Belov I.A., Isaev S.A. Modelirovanie turbulentnyh techenij [Simulation of turbulent flow.]. St. Petersburg, Baltic State Technical University Publ., 2001. 108 p.

[5] Best Practice Guidelines for the use of CFD in Nuclear Reactor Safety Applications. Nuclear Energy Agency. Committee on the safety of nuclear installations. NEA/CSNI/R (2007)5, 2007. 166 p.

[6] Gibson M.M., Launder B.E. Ground effects on pressure fluctuations in the atmospheric boundary layer. J. Fluid Mech., 1975, Vol. 86, pp. 491-511.

[7] Launder B E. RANS modelling of turbulent flows affected by buoyancy or stratification. Part 3 (pp. 50-127). In book "Prediction of turbulent flows". Ed. by G. F. Hewitt, J.C. Vassilicos. Imperial College, London, Cambridge University Press, 2005. 343 p.

[8] Lien F., Chen W., Leschziner M. Low-Reynolds number eddy-viscosity modelling based on non-linear stress-strain / vorticity relations, Proc. 3-rd Symp. on Engineering Turbulence Modelling and Measurements, Greece, Elsevier, 1996, pp. 91-100.

[9] Bradshaw P., Ferriss D.H., Atwell N.P. Calculation of boundary layer development using the turbulent energy equation. J. Fluid Mech., 1967, vol. 28, pp. 593-616.

[10] User guide, Перевод документации S STAR-CCM+ Version 7.02. 2012.

[11] Swinney H.L., Collub J.P., Lanford O., Joseph D., York J., York E. Busse F., Di Prima R.C., Maslow S., Tritton D., Davis P., Gukkenheymer J. Hydrodynamis Instabilities and the Transition to Turbulence. Berlin, 1981. (Russ. ed.: Suinni X., Gollab Dzh., Lanford O., Dzhozef D., York Dzh., York E., Busse F., Di Prima R., Maslou S., Tritton D., Devis P., Gukkenkheymer Dzh. Gidrodinamicheskie neustojchivosti i perehod k turbulentnosti. Moscow, Mir Publ., 1984. 344 p.).

[12] Daly B.J., Harlow F.H. Transport equations in turbulence. Phys. Fluids, 1970, vol. 13, no. 11, pp. 2634-2649.