|

The Limit Load Determination in a Spherical Shell with a Branch Pipe under Combined Loading

Authors: Skopinskii V.N., Semenenko A.N., Vozhov R.A. Published: 07.04.2014
Published in issue: #2(95)/2014  

DOI:

 
Category: Dynamics, Strength, Reliability  
Keywords: spherical shell, branch pipe, elastic-plastic analysis, finite-element method, combined loading, criterion for determining limit plastic load

An applied procedure of the elastic-plastic analysis and the limit plastic load determination is given for a spherical shell with a branch pipe under combined loading. The numerical elastic-plastic analysis of structural connections of the intersecting spherical and cylindrical shells is performed using the finite-element method, theory of shells, and theory of plastic flow. The modified mixed variational statement and two-dimensional tetragonal elements with a special scheme of independent approximation of the displacement and deformation fields in an element are used for the finite-element analysis of intersecting shells. The applied procedure is implemented using the developed ad hoc software SAIS. A variant of combined loading of the connection by internal pressure and bending moment with their proportional growth is considered. A generalized curve of limit plastic loads is obtained for a particular model of hemispherical shell with a branch pipe.

References

[1] The Boiler and Pressure Vessel Code. Sections II and VIII, Division 1and 2. Am. Soc. Mech. Engineers. 2004 Ed. Publ. Cases Interpret. Iss. ASME. New York. 2004.

[2] Specification for Unfired Fusion Welded Pressure Vessels. Brit. St. Ins. BSI. PD 5500:2006. London, 2006.

[3] Unfired Pressure Vessels. Part 3: Design. Europ. Com. St. (CEN). EN 13445. 2002.

[4] Skopinskiy V.N. On the problem of determination plastic the limit load for intersecting shells. Khimicheskoe i neftegazovoe mashinostroenie [Chemical and Petroleum Engineering], 2010, no. 6, pp. 18-21 (in Russ.).

[5] Semenenko A.N. Carring capability of the axisymmetric spherical shell both loaded by internal pressure and conjugated with an open cylindrical pipe branch. Izv. Vyssh. Uchebn. Zaved., Mashinostr. [Proc. Univ., Mech. Eng.], 1966, no. 4, pp. 27-34 (in Russ.).

[6] Semenenko A.N. Carring capability of the axisymmetric spherical shell both loaded by internal pressure and conjugated with a blank off cylindrical pipe branch. Izv. Vyssh. Uchebn. Zaved., Mashinostr. [Proc. Univ., Mech. Eng.], 1966, no. 5, pp. 3137 (in Russ.).

[7] Palusamy S., Lind N.C. Influence of external loads on pressure carring capability of outlet connections. Int. Engrg. Ind., 1973, no. 2, pp. 113-120.

[8] Hsieh M.F., Moffat D.G., Mistry J. Nozzles in the knuckle region of a torispherical head: limit load interaction under combined pressure and piping loads. Int. J. Pressure Vessels and Piping, 2000, vol. 77, no. 13, pp. 807-815.

[9] Hsieh M.F., Moreton D.N., Mistry J., Moffat D.G. Limit loads for knuckle-encroaching nozzles in torispherical heads: experimental verification of finite element predictions. J. Strain Analysis, 2002, vol. 37, no. 4, pp. 313-326.

[10] Naruse T., Mackenzie D., Camilleri D. Gross plastic deformation of a hemi-spherical head with cylindrical nozzle: a comparative study. Proc. ASME 2007. Pressure Vessels and Piping Conf. San Antonio, Texas, USA. July 22-26. 2007, vol. 3: Design and Analysis, pp. 431-438.

[11] Gerdeen J.C. A critical evaluation of plastic behavior data and a unified definition of plastic loads for pressure components. WRC Bulletin, 1979, no. 254, pp. 1-64.

[12] Muscat M., Mackenzie D., Hamilton R. A work criterion for plastic collapse. Int. J. of Pressure Vessels and Piping, 2003, vol. 80, no. 1, pp. 49-58.

[13] Skopinskiy V.N. Napryazheniya v peresekayushchikhsya obolochkakh [Stresses in crossing shell]. Moscow, Fizmatlit Publ., 2008. 400 p.

[14] Skopinskiy V.N., Berkov N.A., Vozhova N.V. A new criterion for determination the limit load in pressure vessels with pipe branch. Mashinostroenie i inzhenernoe obrazovanie [Mechanical Engineering and Engineering Education], 2011, no. 3, pp. 50-57 (in Russ.).

[15] Skopinsky V.N., Berkov N.A. New criterion for the definition of plastic limit load in nozzle connections of pressure vessels. J. Pressure Vessel Technol., 2013, vol. 135, no. 2, 021206. DOI:10.1115/1.4007188.

[16] Il’yushin A.A. Plastichnost’ [Plasticity]. Moscow, GITTL Publ., 1948. 376 p.

[17] Malinin N.N. Prikladnaya teoriya plastichnosti i polzuchesti [Applicable theory of plasticity and creeping]. Moscow, Mashinostroenie Publ., 1975. 400 p.