Numerical Analysis of Penetration of Segmented and Telescopic Projectiles of High Density Alloy into the Steel Target
Authors: Fedorov S.V., Veldanov V.A., Gladkov N.A., Smirnov V.E. | Published: 12.06.2016 |
Published in issue: #3(108)/2016 | |
Category: Mechanics | Chapter: Mechanics of Deformable Solid Body | |
Keywords: numerical simulation, segmented projectile, telescopic projectile, high density alloy, steel target, high-velocity penetration, hydrodynamic mode |
In this research we analyzed how segmented and telescopic projectiles of high density alloy penetrate into a semi-infinite steel target. We carried out the analysis on the basis of numerical modeling within a two-dimensional axisymmetric problem of continuum mechanics. To describe the materials and their behaviour, we used the model value of yield strength. Interaction velocity was from 1400 to 2000 m/s that predetermined the hydrodynamic mode of penetration. Thus, we established the dependence of penetration depth increment on distance between the adjacent elements along the direction of their movement and on quantity of elements for the segmented projectiles with their fixed total length. Preservation of relative penetration depth increment for the segmented projectile with a certain quantity of elements at the same level requires increase in distance between the adjacent elements with increase in interaction velocity. Moreover, for telescopic projectiles we defined their penetrability at various order of interaction with a target of rod and tubular components of the projectile. It is shown, that at the leading arrangement of rod component the telescopic projectile penetration depth is significantly higher, than in a case when at first its tubular component penetrates. The reached increment of penetration depth into a steel target in comparison with the equivalent extended projectile of equal weight and length is recorded at the level of 20% for a case of the segmented projectiles and at the level of 50% for the telescopic.
References
[1] Grigoryan V.A., ed. Chastnye voprosy konechnoy ballistiki [Partial questions of terminal ballistics]. Moscow, MGTU im. N.E. Baumana Publ., 2006, 592 p.
[2] Anderson C.E., Behner T., Hohler V. Penetration efficiency as a function of target obliquity and projectile pitch. J. of Applied Mechanics, 2013, vol. 80, no. 3, pp. 031801-1-031801-11.
[3] Veldanov V.A., Dudik D.E., Maksimov M.A., Fedorov S.V., Kozlov V.S. Influence of angle of attack on the penetration of elongated rod projectiles. Inzhenernyy zhurnal: nauka i innovacii [Engineering Journal: Science and Innovation], 2013, no. 1 (13). Available at: http://engjournal.ru/catalog/machin/blasting/572.html
[4] Chernyak G.B., Povarova K.B. Vol’fram v boepripasakh [Tungsten in ammunition]. Moscow, CNIIKhM Publ., 2014, 360 p.
[5] Fedorov S.V., Veldanov V.A., Smirnov V.E. Influence numerical analysis of velocity and strength of high density alloy elongated projectiles on their penetration depth into steel target. Vestn. Mosk. Gos. Tekh. Univ. im. N.E. Baumana, Mashinostr. [Herald of the Bauman Moscow State Tech. Univ., Mech. Eng.], 2015, no. 1, pp. 65-83 (in Russ.).
[6] Anderson C.E., Subramanian R., Walker J.D., Normandia M.J., Sharron T.R. Penetration mechanics of seg-tel penetrators. Int. J. of Impact Engineering, 1997, vol. 20, no. 1-5, pp. 13-26.
[7] Westerling L., Lundberg P., Holmberg L., Lundberg B. High velocity penetration of homogeneous, segmented and telescopic projectiles into alumina targets. Int. J. of Impact Engineering, 1997, vol. 20, no. 6-10, pp. 817-827.
[8] Babkin A.V., Kolpakov V.I., Okhitin V.N., Selivanov V.V. Prikladnaya mekhanika sploshnykh sred. V 3 t. T. 3. Chislennye metody v zadachakh fiziki vzryva i udara [Applied continuum mechanics. In 3 vol. Vol. 3. Numerical methods in problems of physics of explosion and shock]. Moscow, MGTU im. N.E. Baumana Publ., 2000, 516 p.
[9] Zhernokletov M.V., ed. Metody issledovaniya svoystv materialov pri intensivnykh dinamicheskikh nagruzkakh [Methods for studying the properties of materials under intense dynamic loads]. Sarov, RFYaC-VNIIEF Publ., 2005, 428 p.
[10] Veldanov V.A., Markov V.A., Pusev V.I., Ruchko A.M., Sotskiy M.Yu., Sotskiy Yu.M., Fedorov S.V. Research of dynamic mechanical properties of aluminum alloys by an accelerometry method. Vestn. Mosk. Gos. Tekh. Univ. im. N.E. Baumana, Mashinostr. [Herald of the Bauman Moscow State Tech. Univ., Mech. Eng.], 2010, no. 2, pp. 37-46 (in Russ.).
[11] Fedorov S.V., Bayanova Ya.M. Penetration of long strikers under hydrodynamic conditions with allowance for the material compressibility. Technical Physics. Russ. J. Appl. Phys., 2011, vol. 56, no. 9, pp. 1266-1271.
[12] Orlenko L.P., ed. Fizika vzryva. V 2 t. T. 2 [Physics of explosion. In 2 vol. Vol. 2]. Moscow, Fizmatlit Publ., 2004, 656 p.
[13] Fedorov S.V. On the possibility of "cutoff" of the leading high-velocity portion of the metal jet in the explosion of a shaped charge in the axial magnetic field. Boepripasy i vysokoenergeticheskie kondensirovannye sistemy [Explosives and high energy condensed system], 2008, no. 2, pp. 73-80 (in Russ.).
[14] Veldanov V.A., Markov V.A., Pusev V.I., Ruchko A.M., Sotskiy M.Yu., Fedorov S.V. Computation of nondeformable striker penetration into low-strength obstacles using piezoelectric accelerometry data. Technical Physics. Russ. J. Appl. Phys, 2011, vol. 56, no. 7, pp. 992-1002.
[15] Oran E.S., Boris J.P. Numerical simulation of reactive flow. 2nd Ed. Cambridge Uni. Press, Naval Research Laboratory Publ., 2001. 522 p.
[16] Fedorov S.V., Veldanov V.A. Determination of the dimension of a cavity in water behind a fast-moving cylindrical body. Technical Physics. Russ. J. Appl. Phys., 2013, vol. 58, no. 2, pp. 165-169.
[17] Fedorov S.V. On the penetration depth of a porous striker moving with a hypersonic velocity. Technical Physics. Russ. J. Appl. Phys., 2007, vol. 52, no. 10, pp. 1379-1382.
[18] Fedorov S.V., Bayanova Ya.M., Ladov S.V. Numerical analysis of the effect of the geometric parameters of a combined shaped-charge liner on the mass and velocity of explosively formed compact elements. Combustion, Explosion, and Shock Waves, 2015, vol. 51, no. 1, pp. 130-142.
[19] Ben-Dor G., Dubinsky A., Elperin T. Penetration by non-monolithic and monolithic high-speed impactors. Mechanics Based Design of Structures and Machines, 2007, vol. 35, no. 4, pp. 481-496.
[20] Fedorov S.V., Veldanov V.A. Numerical simulation of cavity formation in soil by a flux of high-speed metallic penetrators. Technical Physics. Russ. J. Appl. Phys., 2006, vol. 51, no. 7, pp. 952-955.
[21] Fedorov S.V., Veldanov V.A. Application of segmented projectiles for cavity formation in soil and rocky targets. Izvestiya Rossiyskoy akademii raketnykh i artilleriyskikh nauk [Bull. of the Russian Academy of Missile and Artillery Sciences], 2012, no. 1(71), pp. 43-50 (in Russ.).
[22] Orphal D.L., Franzen R.R. Penetration mechanics and performance of segmented rods against metal targets. Int. J. of Impact Engineering, 1990, vol. 10, no. 1-4, pp. 427-438.
[23] Weihrauch G., Wollmann E. Segmented penetrators. Propellants, Explosives, Pyrotechnics, 1993, vol. 18, no. 5, pp. 270-274.
[24] Fedorov S.V., Veldanov V.A. Features of cavity formation in the strength matter at influence of a flux of high-velocity penetrators. Tr. Mezhdunar. konf "VII Kharitonovskie tematicheskie nauchnye chteniya" [Proc. of the International conference "VII-th Khariton’s thematic scientific readings"]. Sarov, RFYaC-VNIIEF Publ., 2005, pp. 551-556 (in Russ.).
[25] Veldanov V.A., Maksimov M.A., Fedorov S.V., Kozlov V.S. Influence assessment of the internal openings sizes in hollow aluminum projectiles on the crater sizes in an aluminum target. Vestn. Mosk. Gos. Tekh. Univ. im. N.E. Baumana, Mashinostr. Spetsvyp. [Herald of the Bauman Moscow State Tech. Univ., Mech. Eng. Spec. Issue], 2011, pp. 83-89 (in Russ.).