﻿ Mathematical Simulation of Thermal Stress in a Bainitic Steel Railroad Rail with Accelerated Normalization | HERALD OF THE BAUMAN MOSCOW STATE STATE TECHNICAL UNIVERSITY
|

# Mathematical Simulation of Thermal Stress in a Bainitic Steel Railroad Rail with Accelerated Normalization

 Authors: Pokrovskiy A.M., Voronov Yu.V., Pya Pyo Aung Published: 03.08.2017 Published in issue: #4(115)/2017 Category: Mechanics | Chapter: Dynamics and Strength of Machines, Instruments, and Equipment Keywords: railroad rails, accelerated normalization, problem of heat conduction, thermal residual stress

The purpose of this study was to create a mathematical model which can describe thermal-structural and stress state of a bainitic steel railroad rail in accelerated normalization. The solution of the nonlinear nonstationary problem of heat conduction and termoelasticplasticity is based on the method of finite elements. To describe the conditions of heat exchange, we used boundary conditions of the third kind. We carried out simulations of transforming austenite to pearlite and bainite under isothermal conditions according to Kolmogorov - Avrami - Mehl equation. We describe the transition from isothermal decomposition kinetics of austenite to nonisothermal conditions by the theory of isokinetic reactions involving rules additives. We also offer the option to normalization, namely through heating the rail up to the temperature of 860°C, followed by cooling the air-water mixture for 90 seconds with average speed of cooling the working surface of the head of about 4°C and then in air until its cooling. We show the results of the calculation of temperatures, structures and stresses in a railroad rail to various points of the heat treatment. Findings of the research show that when we normalize bainitic rail steel, we obtain pearlitic-bainitic structure, containing 90-98% of bainite. The martensite present in the structure only in the narrow area near the feather of the sole is 55%. The results show that the use for the manufacture of bainitic steel railroad rails and accelerated normalization as a heat treatment instead of the traditional quenching in oil can significantly reduce the level of residual stresses. We reveal the feasibility of using numerical methods of calculating thermal stresses because experimental methods do not allow us to determine the time strain. The developed software can be used to rationalize the rails heat treatment.

## References

[1] GOST P 51685-2013. Rel’sy zheleznodorozhnye. Obshchie tekhnicheskie usloviya [Railway rails. General specifications]. Moscow, Standartinform Publ., 2014. 202 p.

[2] Pavlov V.V., Godik L.A., Korneva L.I., Kozyrev N.A., Kuznetsov E.P. Railroad rails made of bainitic steel. Metallurgist, 2007, vol. 51, no. 3, pp. 209-212. DOI: 10.1007/s11015-007-0039-8 Available at: http://link.springer.com/article/10.1007/s11015-007-0039-8

[3] Samoylovich Yu.A. Construction of a theory of the differentiated quenching of railroad rails. Metallurgist, 2012, vol. 56, no. 5, pp. 386-394. DOI: 10.1007/s11015-012-9588-6 Available at: http://link.springer.com/article/10.1007/s11015-012-9588-6

[4] Samoylovich Yu.A. Strengthening railroad rails by isothermal quenching to lower bainite. Metallurgist, 2013, vol. 56, no. 9, pp. 779-786. DOI: 10.1007/s11015-013-9650-z Available at: http://link.springer.com/article/10.1007/s11015-013-9650-z

[5] Pokrovskiy A.M. Termoprochnost’ tsel’nokovanykh i bandazhirovannykh prokatnykh valkov [Thermostability of unit-forged and built-up forming rolls]. Moscow, Bauman MSTU Publ., 2017. 272 p.

[6] Tsvetkov F.F., Grigor’ev B.A. Teplomassocibmen [Heat-and-mass transfer]. Moscow, MEI Publishing House, 2006. 550 p.

[7] Zienkiewicz O.C., Taylor R.L., Fox D.D. The finite element method for solid and structural mechanics. New York, Elsevier, 2014. 657 p.

[8] Popov A.A., Popova L.E. Spravochnik termista: Izotermicheskie i termokineticheskie diagrammy raspada pereokhlazhdennogo austenita [Handbook for heat-treater. Isothermic and kinetic diagrams of overcooled austenite disassimilation]. Moscow, Mashgiz Publ., 1961. 430 p.

[9] Christian J.W. The theory of transformations in metals and alloys. Pt. I, II. Oxford, Pergamon Press, 2002. 1200 p.

[10] Pokrovskiy A.M., Voronov Yu.V., Tret’yakov D.N. Numerical simulation of thermal-structural and stress states in the process of hardening railway rails. Izvestiya vysshikh uchebnykh zavedeniy. Mashinostroenie [Proceedings of Higher Educational Institutions. Маchine Building], 2016, no. 6, pp. 13-20. DOI: 10.18698/0536-1044-2016-6-13-20