|

Improved Technology for Heat-Shielding Coating Application onto Turbine Blades

Authors: Zakharov B.M., Bureev I.A. Published: 19.10.2016
Published in issue: #5(110)/2016  

DOI: 10.18698/0236-3941-2016-5-128-136

 
Category: Metallurgy and Science of Materials | Chapter: Material Science  
Keywords: heat-shielding coatings, electron-beam physical vapour deposition (EB-PVD), ASPS-process

The purpose of this research was to review melt crystallization in a free and limited volume. We analyzed the formation of heat-shielding coatings obtained by plasma and electron-beam method. Previous research provides a heat-shielding coating with the columnar structure obtained using the method of suspensions, representing nano-sized powders in liquid media. When spraying, the suspense evaporates and the coating is formed from the vapor phase in the form of a columnar structure. This structure is obtained by an expensive electron-beam method and it has a higher heat resistance than plasma lamellar structure obtained from powders. The method is cost-effective; however, its performance is poor. We proposed an effective technique of applying coating with a columnar structure in the chamber with reduced pressure.

References

[1] Movchan B.A., Tutov N.D. Elektronic-beam evaporation and deposition of materials from vapour phase in the vacuum. Izv. Kurskogo GTU [Proceedings of the Kursk State Technical University], 2009, no. 1(26), pp. 12-18 (in Russ.).

[2] Tang Z., Hartell P., Masindo G., Yaroslavski I., Burgess A. Duration and reliability of axial suspension plasma spray process. ITSC, 2010.

[3] Tang Z., Burgess A., Kesler O., White B., Ben-Oved N. Manufacturing solid oxide fuel cells with an axial-injection plasma spray system. TSC, 2007, pp. 87-90.

[4] Kitamura J., Ibe H., Yuasa F., Tang Z., Burgess A. Structural, mechanical and erosion properties of plasma sprayed yttrium oxide coatings by axial injection of fine powder slurries for semiconductor and flat-panel-display applications. ITSC, 2009.

[5] Bureev I.A., Bureev V.I. Generator dlya polucheniya vysokodispersnykh aerozoley [Generator producing superfine aerosols]. Patent RF, no. 2365428, 2009.

[6] Bureev I.A., Kushnir A.T., Kulagin S.N., Strizhakov A.A., Selyaninov Yu.O., Bureev V.I. Generator vysokodispersnykh aerozoley [Superfine aerosol generator]. Patent RF, no. 2368432, 2009.

[7] Sakhiev A.S., Stel’maх G.N., Chesnokov N.A. Nekotorye osobennosti tekhnologicheskikh plazmotronov dlya obrabotki dispersnykh materialov. V kn.: Plazmennye protsessy v metallurgii i tekhnologii neorganicheskikh materialov. K 70-letiyu akad. N.N. Rykalina [Some features of the processing plasma generators for the treatment of particulates. In: Plasma processes in metallurgy and inorganic material technology. On the 70th anniversary of academician N.N. Rykalin]. Moscow, Nauka Publ., 1973, pp. 230-236.