|

On Replacement of Radiographic Film with Digital Detectors

Authors: Zhukov A.D., Galkin D.I., Ivanayskiy E.A. Published: 09.02.2018
Published in issue: #1(118)/2018  

DOI: 10.18698/0236-3941-2018-1-47-56

 
Category: Mechanical Engineering and Machine Science | Chapter: Manufacturing Engineering  
Keywords: digital radiography, spatial basic resolution, duplex wire image quality identificator, unsharpness, contrast ratio, replacement of traditional radiography with digital detectors

The article introduces a new approach to traditional radiography: we suggest replacing it with digital detectors. According to the experimental data, the most reliable and the easiest way to do it is to use spatial basic resolution (SRb) as an image quality parameter. Findings of the research show that the greater the value of SRb, the less influence on the quality of the resulting image is caused by such factors as imperfection of technology and controls, and the closer the visible image to the radiation analogue. We suggest using SRb parameter at specific object testing because the digital detector image has the same image quality and the same data content as provided by traditional ragiographic method at the X-ray film. Novelty of this research work is that this replacement is based on the assessment of SRb value, which could be defined by duplex wire imagequality parameter used during the test. We suggest using it when monitoring a particular object, since the resulting digital image is as informative (as its analog on a film). These techniques will help not only to decrease testing time and reduce economic costs of testing but also to increase and improve image quality and safety of testing operations

References

[1] GOST 7512–82. Kontrol nerazrushayushchiy. Soedineniya svarnye. Radiograficheskiy metod [State standard 7512–82. Nondestructive testing. Welded joints. Radiography method]. Moscow, Izdatelstvo standartov Publ., 1982. 19 p.

[2] Aleshin N.P., Galkin D.I. A method for increasing the objectivity of the interpretation of weld radiographs. Russian Journal of Nondestructive Testing, 2016, vol. 52, no. 3, pp. 141–145. DOI: 10.1134/S1061830916030025 Available at: https://link.springer.com/article/10.1134/S1061830916030025

[3] Ewert U., Zscherpel U., Bavendiek K. Replacement of film radiography by digital techniques and enhancement of image quality. Berlin, BAM Federal Institute for Materials Research and Training, 2007. 14 p.

[4] Usachev E.Yu., Usachev V.E., Gnedin M.M. Flaw-detective characteristics research of "MTL digital matrix detector — LLF X-ray apparatus" system. II Vserossiyskaya nauchno-prakticheskaya konferentsiya proizvoditeley rentgenovskoy tekhniki. Programma i materialy konferentsii [II Russ. sci.-practice conf. of X-ray technique manufacturers. Proceedings]. Sankt-Petersburg, SPbGETU LETI Publ., 2015, pp. 18–23 (in Russ.).

[5] Bagaev K.A., Spirkov A.B., Kozlovskiy S.S. Computer radiography as alternative to conventional radiographic film technology. V mire nerazrushayushchego kontrolya, 2013, no. 4 (62), pp. 65–70 (in Russ.).

[6] ISO 17636-2:2013 (E). Non-destructive testing of welds. Radiography testing. Part 2. X- and gamma-ray techniques with digital detectors. 2013, ISO. 52 p.

[7] ISO 19232-5:2013. Non-destructive testing. Image quality of radiographs. Part 5. Determination of the image unsharpness value using duplex wire-type image quality indicators. ISO. 3 p.

[8] Norman K. Understanding image sharpness. Рart 1. Introduction to resolution and MTF curves. Norman Koren. Available at: http://www.normankoren.com/Tutorials/MTF.html (accessed: 17.02.2017).

[9] Zuev V.M., Tabakman R.L., Udralov Yu.I. Radiograficheskiy kontrol svarnykh soedineniy [Radiographic control of joint weld]. Sankt-Petersburg, Energoatomizdat Publ., 2001. 148 p.

[10] Dmokhovskiy V.V. Osnovy rentgenotekhniki [Fundamentals of X-ray engineering]. Moscow, Medgiz Publ., 1960. 352 p.

[11] GOST 20426–82. Kontrol nerazrushayushchiy. Metody defektoskopii radiatsionnye. Oblast primeneniya [State standard 20426–82. Nondestructive testing. Methods of defectoscopy radiation. Field of application]. Moscow, Izdatelstvo standartov Publ., 1982. 25 p.

[12] Konnov V.V., Dobromyslov V.A., Sosnin F.R. Tipovye metodiki radiatsionno-defekto-skopicheskogo kontrolya [Typical methods of radiation flaw-detective monitoring]. www.viam.ru: website (in Russ.). Available at: http://viam.ru/public/files/1998/1998-2:02653.pdf (accessed: 13.03.2017).

[13] Gnedin M.M., Galkin D.I., Bystrova N.A., Usachev E.Yu. Otsenka kachestva svarnykh soedineniy tekhnologicheskikh truboprovodov po rezultatam radiograficheskogo kontrolya v sootvetstvii s PB 03-585-03 [Quality assessment of industrial pipeline welded joints based on radiographic control in accordance to PB 03-585-03]. www.ndtgrad.ru: website (in Russ.). Available at: http://ndtgrad.ru (accessed: 12.03.2017).

[14] Gnedin M.M., Galkin D.I. Radiographic control practice of industrial pipelines welded joints. Bezopasnost truda v promyshlennosti [Occupational Safety in Industry], 2011, no. 7, pp. 14–18 (in Russ.).

[15] Stepanov A.V., Kosarina E.I., Savvina N.A. Razrabotka metodiki po ispytaniyu radiografi-cheskikh plenok s tselyu opredeleniya tselesoobraznosti ikh primeneniya v defektoskopii [Method development of radiographic films testing with the purpose of their applicability determination in nondestructive testing]. www.viam.ru: website (in Russ.). Available at: https://viam.ru/public/files/2011/2011-205840.pdf (accessed: 13.03.2017).