|

Problems of Parts Reliability in the Design of Mechanical System

Authors: Manshin  Yu.P., Manshina E.Yu. Published: 17.10.2019
Published in issue: #5(128)/2019  

DOI: 10.18698/0236-3941-2019-5-56-73

 
Category: Mechanical Engineering and Machine Science | Chapter: Machines, Units and Processes  
Keywords: reliability, probability, failure-free performance, operating time, machine, technical system, element

The paper deals with the problems of rationing reliability indicators in the early stages of machine design, which allow the designer to develop the entire list of crucial parts in terms of reliability, and provide a given level of reliability. By analyzing the existing methods of rationing the reliability, we revealed their insufficiency for design, as well as contradictions associated with the use of the exponential law of reliability for this purpose. We synthesized an alternative approach to rationing, which makes it possible to perform a complete structural analysis of the project: from the reliability of the system as a whole to the parts, whose reliability determines the reliability of machines. At the structural level of parts and other elements whose failures are not sudden, the use of the exponential law is eliminated, but the inherent simplicity of mathematical operations is preserved

References

[1] Man’shin Yu.P., Man’shina E.Yu. Planning and evaluation of technical system reliability at the early project stages. Sostoyanie i perspektivy razvitiya sel’skokhozyaystvennogo mashinostroeniya. Mat. 7 Mezhdunar. nauch.-prakt. konf. [Current state and development prospects of agricultural machine engineering. Proc. 7th Int. Sci.-Tech. Conf.]. Rostov-on-Don, DGTU Publ., 2014, pp. 169--171 (in Russ.).

[2] Kovalev A.P., Kantor V.I., Mozhaev A.B. Ekonomicheskoe obespechenie nadezhnosti mashin [Economic support of machine reliability]. Moscow, Mashinostroenie Publ., 1991.

[3] Dal’skiy A. M. Tekhnologicheskoe obespechenie nadezhnosti vysokotochnykh detaley mashin [Technological support of high-precision machine parts reliability]. Moscow, Mashinostroenie Publ., 1975.

[4] Pronnikov A.S. Parametricheskaya nadezhnost’ mashin [Parametric machine reliability]. Moscow, Bauman MSTU Publ., 2002.

[5] Polovko A.M., Gurov S.V. Osnovy teorii nadezhnosti [Fundamentals of reliability theory]. St. Petersburg, BKhV-Peterburg Publ., 2006.

[6] Druzhinin G.V. Nadezhnost’ avtomatizirovannykh system [Reliability of automated systems]. Moscow, Energiya Publ., 1977.

[7] Man’shin Yu.P., Man’shina E.Yu. [Calculation of elements reliability parameters at machine designing]. Sostoyanie i perspektivy razvitiya sel’skokhozyaystvennogo mashinostroeniya. Mat. 10 Mezhdunar. nauch.-prakt. konf. [Current state and development prospects of agricultural machine engineering. Proc. 10th Int. Sci.-Tech. Conf.]. Rostov-on-Don, DGTU Publ., 2017, pp. 261--263 (in Russ.)

[8] Gnedenko B.V., Belyaev Yu.K., Solov’yev A.D. Matematicheskie metody v teorii nadezhnosti [Mathematical methods in reliability theory]. Moscow, Nauka Publ., 1965.

[9] Khozyaev I. A. Nadezhnos’ biotekhnicheskikh system [Reliability of biotechnical systems]. Rostov-on-Don, DGTU Publ., 2014.

[10] Man’shin Yu.P., Man’shina E.Yu. [Reliability parameters calculation of technical system at the last project stages]. Sostoyanie i perspektivy razvitiya sel’skokhozyay-stvennogo mashinostroeniya. Mat. 7 Mezhdunar. nauch.-prakt. konf. [Current state and development prospects of agricultural machine engineering. Proc. 7th Int. Sci.-Tech. Conf.]. Rostov-on-Don, DGTU Publ., 2014, pp. 171--175 (in Russ.).

[11] Man’shin Yu.P., Man’shina E.Yu. Approximate assessment of part life, assuring its required life with specified probability of no-failure operation. Vestnik mashinostroeniya, 2017, no. 12, pp. 20--24 (in Russ.).

[12] Man’shin Yu.P., Man’shina E.Yu. Estimating the life of a machine part. Russ. Engin. Res., 2018, vol. 38, no. 3, pp. 157--161. DOI: 10.3103/S1068798X18030103