|

Forecast of Reactor Steel 08Х16Н11М3-ПД Mechanical Properties under Creep Conditions with Regard for Irradiation and without Irradiation

Authors: Demidov A.S., Kashelkin V.V., Kashtanov A.D., Jakovlev V.A. Published: 15.04.2015
Published in issue: #2(101)/2015  

DOI: 10.18698/0236-3941-2015-2-18-26

 
Category: Power Engineering | Chapter: Nuclear Power Plants, Fuel Cycle, Radiation Safety  
Keywords: long-term strength, creep, forecast, irradiation, strain, steel 08Х16Н11М3-ПД, steel AISI 316

Forecasting technique relies heavily on the works of S.A. Shesterikov with employees. The constants in the basic equations are determined by creep test results at three levels of stress. Experimental data obtained by the creep and long-term strength tests of steel 08X16H11M3-ПД at 600°C and 650°C are presented. Average theoretical value of the short-term strength limit and other factors of underlying equations are computed on the basis of these data. In this temperature range, a long-term strength of irradiated steel is evaluated. The assumption is used of the equality of the ratio of failure deformation on tensile diagram to failure deformation under creep for similar steels - AISI 316 and 08Х16Н11М3-ПД. Calculations show that the irradiation exposure significantly reduces the limit of long-term strength.

References

[1] PNAE G-7-002-86. Normy rascheta na prochnost’ oborudovaniya i truboprovodov atomnykh energeticheskikh ustanovok. Gosenergoatomnadzor SSSR [Structural design standards for equipment and pipelines of nuclear power plants]. Moscow, Energoatomizdat Publ., 1989. 525 p.

[2] OST 108.901.102-78. Kotly, turbiny i truboprovody. Metody opredeleniya zharoprochnosti metallov [Standard 108.901.102-78. Boilers, turbines and pipelines. Methods defining high-temperature strength of metals].

[3] Zhurkov S.N., Sanfirova T.P. Temperature-time relationship for pure metals strength. Doklady AN SSSR [Reports of the USSR Academy of Sciences], 1955, vol. 101 (in Russ.).

[4] Mikhaylov-Mikheev P.B. Spravochnik po metallicheskim materialam turbino- i motostroeniya [Reference book on metal materials for turbine and motor industries]. Leningrad, Krasnyy pechatnik Publ., 1961. 838 p.

[5] Tayra S., Otani P. Teoriya vysokotemperaturnoy prochnosti materialov [Theory of high-temperature strength of materials]. placeCityMoscow, Metallurgiya Publ., 1986. 280 p.

[6] Getsov L.B. Materialy i prochnost’ detaley gazovykh turbin [Materials and strength of gas turbine components]. placeCityMoscow, Nedra Publ., 1996. 591 p.

[7] Ugorskiy A.E. O parametricheskikh metodakh temperaturno-vremennoy ekstrapolyatsii predela dlitel’noy prochnosti [On parametric methods for temperature-time extrapolation of long-term strength]. Problemy prochnosti [J. Strength of Materials], 1986, no. 1, pp. 40-43 (in Russ.).

[8] Tsivilyuk I.S., Avramenko D.S. Parametric methods describing and extrapolating characteristics of refractory materials long-term strength. Problemy prochnosti [J. Strength of Materials], 1985, no. 12, pp. 59-63 (in Russ.).

[9] Shesterikov S.A., Arshakuni A.L., Cheredeeva L.V. Method of temperature-forced forecasting of metal long-term strength. Problemy prochnosti [J. Strength of Materials], 1989, no. 9, pp. 6-9 (in Russ.).

[10] Shesterikov S.A., Beliakova T.A., Voshedchenko B.M., Kashelkin V.V., Kuznetsova I.A., Yakovlev V.A. Long-Term Strength Prediction for Chromium-Nickel Austenitic Steels Based on Short-Term Experimental Results. Materials Physics and Mechanics, 2004, vol. 7, no. 1, pp. 72-78.

[11] Arshakuni A.L., Shesterikov S.A. Forecasting of long-term strength for heat-resistant metal materials. Izvestiya RAN. Mekhanika Tverdogo Tela [Mechanics of Solids], 1994, no. 3, pp. 224-239 (in Russ.).

[12] Demidov A.S., Kashelkin V.V. Dlitel’naya prochnost’, ostatochnyy resurs i povrezhdennost’ konstruktivnykh elementov dvigatel’nykh i energeticheskikh ustanovok [Long-term strength, remaining lifetime, and defectness of structural members of power plants]. Moscow, MAI Publ., 2011. 158 p.

[13] Parshin A.M. Struktura, prochnost’ i radiatsionnaya povrezhdaemost’ korrozionno-stoykikh staley i splavov [Structure, strength and radiation damageability of corrosion-resistant steels and alloys]. Chelyabinsk, Metallurgiya Publ., 1988. 665 p.

[14] Nuclear reactor materials, 1970, vol. 13, no. 1. 21 p.

[15] Horsten V.G., Devries M.G. Effects of Radiation on Materials. 17th Inter. Symposium STP 270, 1996. 1160 p.

[16] Wood D.S., Overview of Programme in Mechanical Properties of Fast Reactor Structural Materials, Proc. I WGFR Speshialists Meeting. Vienna, October 1983, pp. 115-136.

[17] Lovell A.J. Nuclear Technology, 1975, vol. 26, pp. 297-306.

[18] Lovell A.J., Holmes J.J., Trans. Am. Nucl. Soc., 1975, vol. 15, pp. 297-306.

[19] Nuclear reactor materials, 1965, vol. 8, no. 3. 26 p.

[20] Nuclear reactor materials, 1969, vol. 12, no. 1. 30 p.