﻿ Mathematical Simulating of the Flow in the Fan Impeller with Meridional Acceleration | HERALD OF THE BAUMAN MOSCOW STATE STATE TECHNICAL UNIVERSITY
|

# Mathematical Simulating of the Flow in the Fan Impeller with Meridional Acceleration

 Authors: Furashov A.S., Arbekov A.N., Vasenina P.M., Mitrofovich V.V., Semilet N.A. Published: 18.12.2022 Published in issue: #4(143)/2022 Category: Power Engineering | Chapter: Turbomachines and Combination Turbine Plants Keywords: axial turbomachines, fan, meridional acceleration, discrete vortex method, conformal mapping

Abstract

The article considers a comparison of the methods for simulating the flow in the fan impeller with the meridional acceleration of the flow. The aim of this work is to compare the results of flow simulation obtained using the method of calculating the flow along axisymmetric current surfaces with variable thickness in relative motion with the solution obtained by the CFD method. The discrepancy between the results of determining the pressure for the test problem --- the flow in an elementary blade row is not exceeded 2 % with a continuous flow. The resulting distribution of velocity along the contour of the blade makes it possible to proceed to the calculation of the boundary layer on its surface and to take into account the profile losses in the rotor, as well as to clarify the location of the trailing points on the profile. The presented work shows the possibility of using the method of calculating the flow along axisymmetric current surfaces with variable thickness for profiling axial fans with meridional flow acceleration. The rotor was profiled using the method described in the article and a CFD calculation was performed, which confirmed the theoretical head coefficient Ht = 0.68 laid down during profiling at a given flow rate ca1 = 0.5, the total efficiency in the rotor was ηf.i = 0.93

Furashov A.S., Arbekov A.N., Vasenina P.M., et al. Mathematical simulating of the flow in the fan impeller with meridional acceleration. Herald of the Bauman Moscow State Technical University, Series Mechanical Engineering, 2022, no. 4 (143), pp. 138--153 (in Russ.). DOI: https://doi.org/10.18698/0236-3941-2022-4-138-153

## References

[1] Andreenkov A.A. High-pressure mixed-flow fan of tractor diesel cooling system. Traktory i selkhozmashiny [Tractors and Agricultural Machinery], 2014, no. 6, pp. 39--41 (in Russ.).

[2] Shantarin S.S. Main directions of developing high-pressure axial fans for local ventilation. Izvestiya Uralskogo gosudarstvennogo gornogo universiteta, 2003, no. 17, pp. 346--347 (in Russ.).

[3] Brusilovskiy I.V. Fans with meridional flow acceleration. Promyshlennaya aerodinamika, 1962, no. 24, pp. 74--81 (in Russ.).

[4] Wu C.H. A general theory of three-dimensional flow in subsonic and supersonic turbomachines of axial-, radial-, and mixed-flow types. Trans. ASME, 1952, vol. 74, no. 8, pp. 1363--1380. DOI: https://doi.org/10.1115/1.4016114

[5] Bamberger K., Carolus T. Development, application, and validation of a quick optimization method for the class of axial fans. J. Turbomach., 2017, vol. 139, no. 11, art. 111001. DOI: https://doi.org/10.1115/1.4036764

[6] Kim S., Lee K.Y., Kim J.H., et al. Design of mixed-flow pump for Ns475 based on optimum design database. Int. J. Fluid Mach. Syst., 2018, vol. 11, no. 2, pp. 123--128. DOI: http://dx.doi.org/10.5293/IJFMS.2018.11.2.123

[7] Qiushi L., Hong W., Sheng Z. Application of tandem cascade to design of fan stator with supersonic inflow. Chinese J. Aeronaut., 2010, vol. 23, no. 1, pp. 9--14. DOI: https://doi.org/10.1016/S1000-9361(09)60181-3

[8] Michaud M., Milan P., Vo H.D. Low-cost rotating experimentation in compressor aerodynamics using rapid prototyping. Int. J. Rotating Mach., 2016, vol. 2016, art. 8518904. DOI: https://doi.org/10.1155/2016/8518904

[9] Pandya K., Jayakumar N. Experimental test and validation with simulation results for impeller of centrifugal pump using CFD analysis. IJMPERD, 2020, vol. 10, no. 2, pp. 955--964.

[10] Stepanov G.Yu. Gidrodinamika reshetok turbomashin [Hydrodynamics of tur-bomachinery cascades]. Moscow, FIZMATGIZ Publ., 1962.

[11] Belotserkovskiy S.M., Nisht M.I. Otryvnoe i bezotryvnoe obtekanie tonkikh krylyev idealnoy zhidkostyu [Separation and non-separation flow of thin wings with an ideal liquid]. Moscow, Nauka Publ., 1978.

[12] Vallander S.V. On the application of the method of singularities to the calculation of fluid flow in radial-axial turbines. DAN SSSR, 1958, vol. 123, no. 3, pp. 413--416 (in Russ.).

[13] Leontyev A.I., ed. Gazovaya dinamika. Mekhanika zhidkosti i gaza [Gas dynamics. Fluid Mechanics]. Moscow, Bauman MSTU Publ., 1997.

[14] Brusilovskiy I.V. Aerodinamicheskiy raschet osevykh ventilyatorov [Aerodynamic calculation of axial fans]. Moscow, Mashinostroenie Publ., 1986.

[15] Belotserkovskiy O.M., Davydov Yu.M. Numerical modeling of aerogasodynamics complex problems of by large particles method. I. Method. Study of schemes. Uchenye zapiski TsAGI, 1977, vol. 8, no. 3, pp. 1--18 (in Russ.).

[16] Bunimovich A.I., Svyatogorov A.A. Study results generalization of plane compressor grids at subsonic velocity. Lopatochnye mashiny i struynye apparaty, 1967, no. 2, pp. 36--66 (in Russ.).